Turf lawn installation can be a lot of work. It is important to make sure that the ground is level, clean, and free of debris. In addition, you need to create a pathway that is unobstructed.
Once you have completed the necessary preparations, you can install the turf. This can be done by either doing it yourself, or hiring a professional. If you are installing turf on a concrete surface, you may have to join the pieces with adhesive.
You should also consider installing drainage pipes before continuing. The area should have a slight slope to prevent water retention under the turf.
When you begin installation, you should first remove all vegetation and rocks. Any loose soil should be compacted.
Aside from that, all fertilizers and roots should be removed. Before you can lay down the flat base, you must brush the entire surface of the turf with a stiff brush. This will ensure a more even installation.
When laying out the turf, you should place the rolls of grass one after the other. Leave about a three-inch space between the perimeter and the base. Similarly, you should leave about a four-inch space between the top of the turf and the hardscape.
After laying out the turf, you can apply seam tape. Seam tape is used to link the cuts of turf together. However, you should avoid making more than two cuts at a time.
After the seams have been applied, you should let the turf rest for about 24 to 48 hours. During this time, you should also allow it to settle. Also, you should be careful to avoid wrinkles.
Comments
Post a Comment